Grabber 2 Kart Seat | Kart Parts Depot |

NOTE: THIS ITEM HAS ADDITIONAL SHIPPING & HANDLING CHARGES BECAUSE IT IS OVER-SIZED AND CAN ONLY BE SHIPPED GROUND. IF YOU HAVE OTHER ITEMS ON YOUR ORDER THEY WILL BE SHIPPED SEPARATELY. THIS ITEM CAN ONLY BE SHIPPED BY ITSELF AND MUST BE SHIPPED GROUND. Due to size of the package, this product can only be shipped GROUND, not priority.

DUE TO THE UNIQUE NATURE OF THIS DESIGN - the seat must be cut off from the mold areas and then twisted and pulled to remove it from the mold. This cannot be avoided and it will leave marks (scratches and/or slight gouges) in a few areas and scuffing on the interior of the seat which do not impact the functionality or performance.

No more sliding around the seat while corning. Reinforced in critical areas, designed to work with the chassis not against it.

Approx. 8 lbs. Black standard, carbon fiber available for additional charge of $130. Add product code LL-CarbonFiber to your kart if you want your seat to have carbon fiber

The GRABBER 2 is Lightning Light's most comfortable lay down seat on the market. The extended back cradles your upper body with support making you more up right and comfortable.

In addition, the expanded butt area lowers your roll center 2-4 inches over the previous seats and with better lateral support you're firmly fixed in position in the center of the kart. This allows for better weight transfer to all points of the kart and makes the driver more relaxed and comfortable for a longer period of time.... the end result is lower, more consistent lap times!

This lay down seat is great for all track types, especially hard surfaces.

Small (Junior) - 10" waist size
Medium - 11 1/4" waist size
Large - 12 1/4" waist size
X-Large - 13 1/4" waist size
XX-Large - 14 1/4" waist size

Tags: Go Kart Seat Group| Kart Seat Group | Kart Parts | Go Kart Parts

Sizing Chart

Customers who looked at this item as bought these items.